Contents
- Lsi Megaraid Storage Manager Download
- Lsi Megaraid Storage Manager Download Server 2012
- Lsi Megaraid Storage Manager Download Server 2008 R2
To launch the LSI Software RAID Configuration Utility: 1. Turn on the system. During POST, the LSI Software RAID Configuration Utility automatically detects the installed SATA hard disk drives and displays any existing RAID set(s). Press + to enter the utility. LSI MegaRAID Software RAID BIOS Version A.2R. LSI 2108/2208 SAS MegaRAID Configuration Utility User's Manual Contacting Supermicro Headquarters Address: Super Micro Computer, Inc. 980 Rock Ave.
Introduction
This document provides a list of the most common commands needed when working with LSI MegaRaid Controllers for the Unified Computing System (UCS).
MegaCLI is a utility used to obtain information from the LSI Raid Controller. MegaCLI can also be used as a troubleshooting tool. Raid controller events at this point are not captured in the Cisco Unified Computing System (UCS) System Event Logs (SEL) or Onboard Failure Logging (OBFL) logs.
MegaCLI supports Windows, Linux, VMware, Solaris, DOS and Free BSD. You will need to unzip the file after download and choose the proper install package based on the operating system (OS). More information about install procedures, bug fixes, and supported raid controllers are in the 8.0.4.07_MegaCLI.txt file. This file is available once you have performed the initial unzip. Detailed install procedures can be found in the read me file associated with each OS type. Download the MegaCLI utility from LSI at this link:
Note that MegaCLI is now called StorCLI.
Prerequisites
Requirements
Cisco recommends that you have knowledge of these topics:
- LSI MegaRaid Controllers Soundtrack downloads free.
- Unified Computing System
Components Used
This document is not restricted to specific software and hardware versions.
Lsi Megaraid Storage Manager Download
Conventions
Refer to Cisco Technical Tips Conventions for more information on document conventions.
Commands
This command provides the Product Name, Serial Number, Firmware version, Manufacturing date, Hardware Configuration, Settings, Capabilities, Limitations, Devices Present, Supported Operations, Error Counters, and Default Settings:
This command pulls all of the events and writes them to a file named event log:
This command displays the firmware log which includes environmental data, controller properties, memory information, events, and information about the Battery Backup Unit (BBU) such as physical properties, monitored information, capacity, and design information. The output also provides event messages specific to the BBU.
Displays information about all physical disk drives and other devices connected to the selected adapter(s); includes drive type, size, serial number, and firmware version. For Serial Attached SCSI (SAS) devices: includes SAS address. For SAS expanders: includes number of drives connected to expander.
Illuminates the locator led on the drive:
Turns off the locator LED on the drive:
Lsi Megaraid Storage Manager Download Server 2012
Displays BBU firmware, charging, capacity and properties information:
Lsi Megaraid Storage Manager Download Server 2008 R2
Displays auto learn information:
Displays detailed charging status and gas gauge status:
![Megaraid Megaraid](/uploads/1/2/6/8/126869748/404603106.png)
This will silence the raid controller beep tones.
Preboot CLI
If the customer cannot install the MegaCLI utility or it is not available for some other reason, you can get to the Preboot CLI and run the same commands as shown above.
The only difference is that the commands begin in the Preboot CLI after the 'MegaCli64' above.
For example: